Dice Tower - Free 3D Print Model

Search models, users, collections, and posts

NoWayOut1980

Toys & Games>Board Games

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 8% infill

Designer

23.4 h

1 plate

4.8(28)

Open in Bambu Studio

Boost

609

1686

1.2 k

261

Released

Description

This is my first self-designed dice tower.
I printed it without supports.
I wouldn't scale it down because some of the walls might be too thin.
Have fun printing and painting!

dice

dicetower

boardgame

boardgame accessories

Comment & Rating (49)

@topsljack

Love it!! Printed for a friend in my D&D group.

(Edited)

The designer has replied

@NoWayOut1980

Thank you ☺️

@user_2423682831

what filament did you use

@DarkJibious

Boosted

Print Profile

0.16mm layer, 2 walls, 8% infill

Superb tower Printed in grey PLA Silk, just needs painting Thank you

The profile uploader has replied

Show original

@NoWayOut1980

Thank you. Looks Awesome 😃

@briwnt6

Print Profile

0.16mm layer, 2 walls, 8% infill

I don't know what kind of magic you used to be able to print this with no supports. It turned out perfect.

The profile uploader has replied

@briwnt6

this is printed with sunlu petg grey. can't get over the great detail and quality of the print. Thanks for the great file

@NoWayOut1980

thank you 😉

@user_525063833

Print Profile

0.16mm layer, 2 walls, 8% infill

Nice design, works as expected. Printed with few supports, but probably they are not required

The profile uploader has replied

@NoWayOut1980

Thank you ☺️

@user_1476996434

Boosted

Print Profile

0.16mm layer, 2 walls, 8% infill

this is a beautiful model. very hard to print because of the incredable detail. once you get it right. wow does it look good. if you paint it using your ams be prepped to take a while to get it to print. again because of the detail. i strongly recommend this model. its strong well built and different. definatly a usable model.

The profile uploader has replied

@NoWayOut1980

Thank you very much for the warm Words 😊

@AWausO

Print Profile

0.16mm layer, 2 walls, 8% infill

Klasse, danke für die Vorlage

The profile uploader has replied

@NoWayOut1980

thank you ☺️

@Matt_KevinMcG

Print Profile

0.16mm layer, 2 walls, 8% infill

printed awesome. Used Polymaker gunmetal grey PLA. No issues with bridges or stringing at all. Top surfaces were all Hilbert Curve as well.

The profile uploader has replied

@NoWayOut1980

Nice 👍😀

@RobPrints3D

Print Profile

0.16mm layer, 2 walls, 8% infill

Love it !! prints super easy — this is silk pla from Panchroma

@snooziescottie

Print Profile

0.16mm layer, 2 walls, 8% infill

Other Issues:This printed great! But the issue is when you put your dice in the top the fence isn’t tall enough and they just “jump” over it and roll onto the floor. But again, it printed absolutely beautifully. just wish the dice would stay in the fence

@user_2526062133

couldn’t you just make the fence a little taller?

@miss_buggy88

Print Profile

0.16mm layer, 2 walls, 8% infill

Great print!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Smash! The Auto-Reload Dice Tower

Rossero

24 k

11.5 k

dice tower

朔夜时雨

4.8 k

1.3 k

Dice Tower

create3d.co

3.5 k

822

Dragon Dice Tower

Crossel

5.4 k

2.8 k