Garmin Venu 3 Charging Stand - Free 3D Print Model

Search models, users, collections, and posts

Jay_Pi

Household>Other House Models

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 50% infill

Designer

3.3 h

1 plate

4.7(43)

Open in Bambu Studio

Boost

151

463

108

921

545

Released

Description

Boost Me (for free)

If you like it, boost me for free.

This model was inspired by the below charging docks and built completely from scratch.

https://makerworld.com/en/models/534276?from=search#profileId-451154

https://makerworld.com/en/models/391516#profileId-292545

This charging stand is for Garmin Venu 3. The design objective is to have the watch be elevated when charging and has to accommodate different watch bands.

List of Materials:

3D Printed Parts

Watch Stand
Watch Back Plate

Non-3D Printed Parts

2 M2*6 Hex socket cap head screw
2 M2*3-3.5 Female brass insert knurled nuts
1 USB-C Garmin Adapter
1 USB-C Cable
Super glue (if you intend to permanently merge the two halves of the charging dock)

Build Process:

Affix the female brass insert to the Watch Back Plate.

Insert the USB-C Cable from the hole at the back of the Watch Stand and insert the USB-C Garmin adapter to the appropriate hole of the Watch Back Plate.

Connect the USB-C cable to the USB-C Garmin adapter and Watch Back Plate Assembly.

Connect the Watch Stand and Watch Back Plate with the 2 M2 screws or by super glue and route the wires on the cable clips along the side of the Watch Stand.

Enjoy the watch stand/ charging dock.

Comment & Rating (108)

@dlab_cc

Print Profile

0.16mm layer, 2 walls, 50% infill

Great design and perfect fit 👍

The profile uploader has replied

@Jay_Pi

Thank you

@Gesuon

Boosted

Spectacular! I remembered I had the Garmin USB-C plug I ordered a long time ago and it looks great

The designer has replied

Show original

@Jay_Pi

Thank you

@user_2820749353

Boosted

Print Profile

0.16mm layer, 2 walls, 50% infill

The profile uploader has replied

@Jay_Pi

Thank you. Charging adapter should be down instead of up :-)

@user_2820749353

Boosted

I can't run the cable like that 😔

(Edited)

@user_2820749353

Boosted

When I get the adapter it will be ok

(Edited)

@tsubus

Boosted

Print Profile

0.16mm layer, 2 walls, 50% infill

printed very nicely in PLA

The profile uploader has replied

@Jay_Pi

Nice color! Thank you

@kahuna26

Boosted

nice print and fun to build aswell!

The designer has replied

@Jay_Pi

Thank you.

@user_2592062504

Boosted

Print Profile

0.16mm layer, 2 walls, 50% infill

The final product quality is quite good Support material removal was also smooth It was unusable with the cable included with the VENU3

The profile uploader has replied

Show original

@Jay_Pi

Thank you. Just noticed that the orientation of the charging adapter was reversed, it should be facing down?

@lazara007

Print Profile

0.16mm layer, 2 walls, 50% infill

nice

The profile uploader has replied

@Jay_Pi

Thank you.

@user_2391529929

Boosted

Print Profile

0.16mm layer, 2 walls, 50% infill

Came out great!

The profile uploader has replied

@Jay_Pi

Thank you

@user_2391529929

Boosted

Replying to @Jay_Pi :

HI Jay, It came out great. I made it for my wife because I thought she had the Venue 3, but go to find out she has the Vevo active 4. I have a Vevo 3 and it works without the hardware.