Easy Cable Winder - Free 3D Print Model

Search models, users, collections, and posts

KL Worx

Tools>Organizers

IP Report

Print Profile(2)

All

P1S

P2S

X2D

H2D

H2S

H2C

P1P

A1 mini

H2D Pro

X1E

X1 Carbon

A2L

Updated Profile - Better Tolerances

Designer

3.8 h

2 plates

4.8(588)

0.2mm layer, 2 walls, 15% infill, magnetic lid and base

1.8 h

1 plate

4.5(25)

Open in Bambu Studio

Boost

4106

13108

1110

310

16.4 k

10.5 k

Released

Bill of Materials

Bambu Filaments

Select all

Black (14100) / Filament with spool / 1 kg

PLA-CF

Burgundy Red (14200) / Filament with spool / 1 kg

PLA-CF

Matcha Green (14500) / Filament with spool / 1 kg

PLA-CF

Description

Boost Me (for free)

Your Boosts Helps Me Create More Free Models! Thank You Very Much!

Easy Cable Winder available in 2 designs - Because Tangles Are for Headphones from 2003

Say goodbye to cable chaos and hello to smooth, organised vibes! This 3D-printable cable winder is your new pocket-sized superhero, rescuing cords from the evil clutches of knots and tangles.

Whether it’s charging cables, earbuds, or mysterious USBs you swear you didn’t own, this little guy’s got your back. Just wind, snap, and boom – tidy desk, tidy life.

Printing:

2 designs each on separate plate
winder prints with supports

IMPORTANT:

If you are not using my print profile and use STL files to slice it yourself make sure you open winder and lid as ONE OBJECT.

It Should look like in the picture below:

Tested with Bambu Lab filaments: PLA-CF, Basic PLA, Matte PLA

Assembly and using:

Very simple 2 part design, put a cable in winder, make sure both cable ends are same length, line cable with 2 grooves on bottom part and then twist top part till it snaps, then wind the cable in. Done!

Check Out My Other Designs!

All photos uploaded are of the actual printed model, and are copyright protected
If you enjoy this model please consider to buy me a coffee
Commercial licence membership available through the link below or on my Patreon

Membership

With a Commercial License Membership, you gain the right to sell 3D prints made from my designs.

Join

Comment & Rating (1110)

@GoEaze

Boosted

This is the first design I have boosted. I have read a lot of comments about how this doesn’t work and the winder is always stuck. I have now printed this model on 3 different printers. Kobra 3, A1 and Qidi Q2. Each one has worked as intended. Check your settings and maybe calibrate your printers as this model is excellent. Thank you.

The designer has replied

@klworx

thank you very much for your feedback and kind words and for the boost 🚀👍 much appreciated 😃

@user_1213798738

Lovely piece – but I can't turn the winder

The designer has replied

Show original

@smartlivenet

I am experiencing the same issue. Rotation is unfortunately impossible. The behavior is like a lid that locks into place

Show original

@klworx

is it stuck, try to wobble it up or down. Lid should spin separately from winder part and you should twist and lock it in the place.

@klworx

Replying to @smartlivenet :

sorry to hear that, try to wobble it up and down, tolerances was pretty loose on this model. let me know if you manage to get it sorted, if not I will upload print profile with even bigger tolerances

@user_4074936991

Print Profile

Updated Profile - Better Tolerances

Printed with no issues on default settings. would like to see a slightly larger model for longer cords

The profile uploader has replied

@klworx

thanks for your feedback 👍 it should scale up ok

(Edited)

@user_4074936991

Replying to @klworx :

👍

@Liratron

would be great for to expose different sizes! thank you!

@user_766610476

I cant get the winder in the lid its too tight ive even tried to sand it a bit

The designer has replied

@klworx

sorry to hear that, which part does not work, because winder prints together with lid and should spin separately from lid. lid should be placed on base, twisted and it should snap in place.

@user_766610476

Replying to @klworx :

mine printed in hree pieces there were three fills version 1 and two i printed the version 1 but there were three pieces in both versions what am i doning wrong sorry i might be an idiot

@klworx

Replying to @user_766610476 :

ok, I see where the problem is, if you using bambu printer then print from app or computer my profile and do not change anything. or you should be able open 3mf files on other slicers also, but if you are using stl, then make sure you open lid and winder together in your slicer app and load them as one part. it should be printing like in picture .

@user_2411325370

Print Profile

Updated Profile - Better Tolerances

print came out flawless. print was large and yet didn’t quite fit some cables. I think the cable doesn’t distribute evenly inside the spool. not sure if design could be tweaked. perhaps an outward bulging wall might accommodate cables bunching toward the centre, but not sure if that would fix it.

The profile uploader has replied

@klworx

thank you very much for your feedback 👍

@kuromimi

Print Profile

Updated Profile - Better Tolerances

Love these! The tolerance is really nice and works well overall.

The profile uploader has replied

@klworx

Thank you very much for your feedback 😃

(Edited)

@user_1456560358

What is this filament? Its beautiful!

@kuromimi

Replying to @user_1456560358 :

It's the Bambu Lab PLA Basic filament in Purple (10700)! Here's the link for it: https://us.store.bambulab.com/products/pla-basic-filament?id=41884191752328

@mrsb_ee

Boosted

I love this model, but the triangles don‘t align after I put the two halfs together. What am I doing wrong? This is driving me nuts. 😂

The designer has replied

@klworx

Thank you very much for the boost 🚀👍 much appreciated! make sure it’s properly closed, it should snap in place locked and pattern should line up

@mrsb_ee

Boosted

Replying to @klworx :

I will give it a try. Maybe I was not energetic enough. 😅

@mrsb_ee

Boosted

update: the triangles align perfectly; I was too tentative… 😅Thanks for this great design.

@lore_marcolini

Print Profile

Updated Profile - Better Tolerances

good model, I had to increase the diameter and consequently scale the whole model to accommodate the 2 meter long cable.

The profile uploader has replied

@klworx

Thank you very much for your feedback 😃

@mrsb_ee

Boosted

By what percentage did you enlarge the design

(Edited)

Show original

@lore_marcolini

Replying to @mrsb_ee :

I increased the outer diameter from 75 to 85 while maintaining constrained proportions for a proportional enlargement of all dimensions

(Edited)

Show original

@Daim

118% incline for Ø 5mm cable and 1.5m length. Perfect!

The designer has replied

Show original

@klworx

thank you very much for your feedback 👍

@Jszy25

Broke it trying to spin the winder. Impossible to get moving. A1 with general PLA. I used the larger tolerance version .

The designer has replied

@klworx

sorry to hear that, it should work with bambu printer and bambu filament, I will double check the print profile

@Jszy25

Replying to @klworx :

All good, just wanted to provide some feedback.

@klworx

Replying to @Jszy25 :

thanks

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Portable Cable Organizer / Winder

squinn

99.9 k

22 k

Simple filament winder

TmnRsmn

10.2 k

1.3 k

Easy Drill Spool Winder

babodad

312

Filament Spool Winder

Layer4ever

6.8 k

1.5 k