Batman (Adam West Version)
Print Profile(2)
Description
This was a request from one of my Patreon members. If you have a request, want FREE*Patreon exclusive* models(like the ones below), or if you are interested in members only models and commercial licenses to sell your physical prints visit my Patreon in bio http://patreon.com/JustBe3D
Boost Me (for free)
Boosts are very much appreciated...Thank You
The frame I used is a new designe by one of my Patreon members that came out really nicely with a textured build plate. It can be found at https://makerworld.com/en/models/598580#profileId-520703
Instructions
I included 2 different print sizes but feel free to resize, just do not change the Z axis
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Cyan Transmission Distance: 0.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Silver
At layer #16 (1.36mm) swap to Jade White
At layer #21 (1.76mm) swap to Cyan
At layer #28 (2.32mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)