Hueforge Print Infinite Frame- 200mm x 200mm

Here is the link for the connectors and block offs to fit this frame:  https://makerworld.com/en/models/598587#profileId-520707

I recently got into printing Hueforge art pieces and wanted to frame some of them. While I found some frames already made and ready, I could not seem to find something expandable and connectable such as this. So, I designed this frame to be infinitely expandable to be able to make sets of your favorite works. These frames can be configured in many ways to add desired effect to your Hueforge prints. You may add a brim if needed to the print, outer only, but I have only had the corners peel up slightly when I haven't cleaned my build plate properly in a while. This frame is designed to fit 160mm x 160mm. If you have any issues printing these, please reach out and I will be happy to help, but they are printing pretty easily so far. I have included both bock offs and connectors so that there are no unwanted holes in the backside if not connected to another frame. I also included a mounting slot on all 4 sides to be able to hang these on the wall if desired and also so that the frame is non directional. I will also be updating the model with wall hangers and table stands to fit the same slot for ease of use. Currently printing the block offs in the same color as the frame. The picture retaining cross and connectors I have been only printing in black as they are not seen on a finished piece( only shown in picture to show how it connects). The connectors and block offs are a pretty tight press fit. If installed and removed multiple times, the pieces may wear some leaving a much looser fit(may need to add glue if rearranging the frames too much causes this.)

Artwork shown in pictures is by JustBe 3D. The files are for the frames only. You can find more of their work here on maker world at https://makerworld.com/en/@user_2108045257 and on patreon at https://www.patreon.com/JustBe3D/posts.