Sanja 3D

cover

20241022_120258.jpg

20241022_115917.jpg

20241022_115739.jpg

plate_1.png

2024-10-22_34ed40dab8fc7.jpg

0.2mm layer, 3 walls, 20% infill

Wire Cable Holder Arms (Fixed Positioning)

Ooze Control Creations

1F0D99D8-6CAE-48A6-9991-055559CC5502.jpeg

Print Profile Pic 2.png

Print Profile Pic.PNG

IMG_8471.jpg

IMG_8469.jpg

IMG_8457.jpg

BFA2A69B-240A-4721-97B9-EBA7389B36BD.JPG

I fixed the positioning of the flipped (mirrored) alligator clamp “wire cable holder” arm (so that both mirrored and non-mirrored clamp arms would have clamp centerlines aligned (front-to-back) once installed onto the PCB Holder base rail that this design is a remix for). Did some chopping and remerging in the slicer, and then also had to then create a custom little corner tangency radius piece in CAD software to re-blend the surfaces, but it all worked out perfectly first try and looks as if it were meant to be! A few other minor setting tweaks are included here as described below.&nbsp;I&#39;ve got the print plate on this profile setup for a single color PLA with the both mirrored clamp arms along with the 2x base clamp rings for the PCB holder base (just like the original print profile on this model&#39;s upload). But I personally did my own clamp arms (same as those uploaded in this profile) separate from the base rings to allow for different filament selections without nearly as much waste. &nbsp;If you want to customize your own creation with various colors (like I did) or any other setting adjustments, feel free to use this profile to grab the fixed flipped arm object I made in this profile for use in your personal one (main reason I&#39;m uploading it)! I also did not see that someone also did a similar “fix” in a separate model, but either way works :)&nbsp;Profile settings include:<ul><li>Single Color Basic PLA, Textured PEI Plate, 0.12mm Elephant Foot Comp, No Supports</li><li>Clamp Arms (for both mirrored and default types)<ul><li>Variable Layer Height (0.20mm Base Layer)</li><li>5 Wall Loops (Mod applied to each for 3 walls on base layer just to prevent over-extruding too much down there and to help the bottom surface look a bit better)</li><li>32% Gyroid Sparse Infill</li></ul></li><li>Base Rings<ul><li>0.15mm Layer Height (0.20mm Base Layer)</li><li>4 Wall Loops</li><li>Concentric Top Surface</li><li>30% Gyroid Sparse Infill</li></ul></li><li>Slightly Slowed Print, Travel, and Acceleration Speeds (helpful all around on bed slingers)</li></ul>

Re-Aligned Both Clamp Centerlines, 5 Walls, Gyroid Infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

squinn

Adjustable PCB Holder Tool

Very simple to print soldering wire holder addon for PCB holder tool that can be found here:<a target="_blank" href="https://makerworld.com/en/models/159336?from=search#profileId-174926" rel="nofollow noopener">https://makerworld.com/en/models/159336?from=search#profileId-174926</a>&nbsp;Great Clamps design used in this model you can find here:<a target="_blank" href="https://makerworld.com/en/models/704267#profileId-634049" rel="nofollow noopener">https://makerworld.com/en/models/704267#profileId-634049</a>&nbsp;Thanks to the original Authors!

Wire, Cable Holder and Adjustable PCB Holder Tool

ASIA

Print Profile(2)

Description

Comment & Rating (51)

This remix is based on

License

Related Models