Rolex F1 Wall Clock, functional for hanging.

Wall clock for Formula 1 fans.

Hi friends, I have designed the model so that it fits on the A1 - P1S printing plate.

It is laminated in 3 plates, one for the outer dial, another for the inner part, and another plate for the minute and hour hands.

To avoid possible tolerance problems with the filaments, it is designed in such a way that only 4 drops of glue need to be used and the base of the clock is dropped onto the dial. You can be guided by the seams, which are painted on the top of the dial and in line with the small hole on the back so that it can be hung on a wall.

The hollow for hanging the clock on the wall is designed for use with a simple screw.

Filaments used:

Recycled Pla Smartfield

Bambu basic Pla

Pla sunlu “gold”

If you use the sunlu Pla, keep in mind that I have increased the temperature of said filament to enhance the shine, at the expense of a small imperfection in the corners that is hardly noticeable.

Clock machinery

I have used the machinery that bambulab sent me with the purchase of my printer, but you can use any machinery that is within your reach, amazon, aliexpress, etc. You won't need the second hand, it's not originally on the clock.

If, like me, you are a Formula 1 fan, don't hesitate, you can't miss this clock.