Rolex Submariner – Wall Clock by Sparco

Sparco

Household>Decor

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

Black version (PLA Basic)

Designer

6.5 h

3 plates

5.0(59)

Blue version (PLA Basic)

Designer

6.5 h

3 plates

4.8(10)

Green version (PLA Basic)

Designer

6.5 h

3 plates

5.0(6)

Open in Bambu Studio

Boost

285

515

131

133

692

313

Released

Description

Membership

Join

Now you can hang up a wall clock that is inspired by the Rolex Submariner!

The bezel and dial can be connected without screws. Simply push the two parts into each other. For the second hand, you must remove the small black pin from the Clock Kit second hand. Then push the black pin through the printed second hand.

Please note that this model has been shared for non-commercial, personal use only.

Also check out my other wall clocks!

Rolex GMT-Master II: https://makerworld.com/en/models/1005310

Rolex Explorer Vintage: https://makerworld.com/en/model/1036551

Patek Philippe Nautilus: https://makerworld.com/en/models/1133027

Tudor Back Bay 58: https://makerworld.com/en/models/966249

Tudor Pelagos FXD: https://makerworld.com/en/models/907526

Omega x Swatch MoonSwatch: https://makerworld.com/en/models/1076101

Mondaine Railway Clock: https://makerworld.com/en/models/1098669

If you value my work and would like to continue supporting me, you could buy me a coffee. Any help is appreciated!

Boost Me (for free)

If you have extra boosts to spare, I’d truly appreciate your support. Your boost will help me continue sharing unique, niche models for the community to enjoy. Thank you very much!

Bill of Materials

Maker’s Supply Kits and Parts

Clock Components Kit-MH011

MH011

8.00 USD

× 1

Bambu Filaments

Black

A00-K0-1.75-1000-SPLFREE

19.99 USD

× 1

Silver

A00-D1-1.75-1000-SPLFREE

19.99 USD

× 1

Jade White

A00-W1-1.75-1000-SPLFREE

19.99 USD

× 1

Blue

A00-B9-1.75-1000-SPLFREE

19.99 USD

× 1

Bambu Green

A00-G6-1.75-1000-SPLFREE

19.99 USD

× 1

Buy Now

Download BOM

Comment & Rating (131)

@Redpearl99

Boosted

I'm pretty new to the printer. Ive been trying to print at a fine .12 height for more detail but the numbers on the bezle won't all stick to the plate. At least a few warp and ruins the print. Any help on what I'm doing wrong? Is it bad to print at a lower height?

(Edited)

The designer has replied

@user_423925675

Why are you changing the settings if you're inexperienced? Your setting is far too thin, that will not work. Use the print profile from the designer, that will print perfectly. Just look at all the pictures here.

@Sparco

a finer height does not give you any quality advantage here, as the dial is printed face down on a flat surface. it only increases the risk of adhesion problems, I would use the provided print profile. this has been tested and works.

@Redpearl99

Boosted

Replying to @Sparco :

Thank you. I got it to work now.

@Chicag089

Boosted

sehr geil 🤩

The designer has replied

@Sparco

looks fantastic :-)

@user_90112032

Boosted

Thank you. Close enough to the real thing. I tossed the second had clip so printing one now. Great work

The designer has replied

@Sparco

Thank you! That's a great combination! :-)

@iDoAr1971

Boosted

Print Profile

Black version (PLA Basic)

Bellissimo

@Sparco

looks great 👍

@EE88

Print Profile

Black version (PLA Basic)

incredible model! not the easiest print depending on what filament you are using but overall 10/10

@AllHailTrev

Boosted

Sick model! printed with no issues

The designer has replied

@Sparco

Thank you, looks good!

@MoonshineRidge

Boosted

Print Profile

Black version (PLA Basic)

Excellent model! Had to change filament color to silver/grey for outline on circlular hour 5 marker (Korper317). Was white for me for some reason. Also used “Arachne” walls which gave me a better M in chronometer for some reason. White Bambu PLA Basic isn’t very opaque, but is all I had on hand. May try adding another base layer or two to improve my whites if I can figure it out. :) Still brand new to printing. Tried a smooth plate (for first time) on hands which came out ok. Love the design!

@Sparco

Looks super good! Cool idea with the smooth plate!

@Zambo

Boosted

Excellent reproduction, truly well done, congratulations, the only thing is that the white parts should have more layers because with only 2 layers and the black on top the white becomes gray otherwise splendid, thank you for sharing

Show original

@user_2537540245

Boosted

Printed out great! Can I remix this to add depth to some of the markers? Also, please make a GMT. :-). Boosted!

The designer has replied

@Sparco

Hey, thank you so much! Looks good. I'm actually working on a new model with four hands ;-) I'll think about changing the license for allowing remix.

@derOstfriese

Boosted

Print Profile

Black version (PLA Basic)

Gorgeous 😍 A new eye-catcher in the kitchen

Show original

@Sparco

Looks good 🙋🏻‍♂️

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License