LED Light Strip Channel Sys- 90d Corner Options

Please read all instructions before printing.

Note, this is a companion model to my primary model for the LED Light Strip Channel System.

This model is just options for alternate 90 degree corner piece angles; inside and outside corners.

For the standard pieces; straight sections and diffuser lens covers please see model:

LED Light Strip Channel System for Surface Lightin by BigSarge207 - MakerWorld

For 135 degree or 120 degree corners see:

https://makerworld.com/en/models/696723#profileId-625677

I've included a print profile for those that have and chose to use PLA support material for the support interface layer. There's also a profile for printing supports using default material and settings.

The corners included in this model:

90d outside corner (Modifiable length)

90d inside corner (Modifiable length)

90d inside corner, left return truncated (Modifiable length)

90d inside corner, right return truncated (Modifiable length)

To modify the lengths of the ones noted as modifiable, please refer to the attached pdf instruction sheet.

If you follow the instruction to modify any of the corners or leave them the standard length, the final step will be to merge the pieces back as one object. After you do that, you can apply the adaptive layer settings; I recommend setting “adaptive quality/speed” to 0.25 and then applying it.