Noggenfogger Elixir
Print Profile(2)
Description
Item description
THE potion to always have with you. It can do several things for you, but levitation is the most wanted effect.
Beware though, many have become addicted to it.
Warning : Bacteria can lodge in the overlapping layers of the print. The contents of the potion should not be consumed!
Content : The kit consists of 4 pieces to assemble:
- A gold base
- A gold outline
- A transparent potion
- A gold cap
Dimensions (in cm): Length: 6.7 / Depth: 6.7 / Height: 8.0.
Filaments used:
PLA Silk Gold
PETG Transparent Basic
Kit assembly
Glue is required during assembly.
A: Cap / B: Potion / C: Outline / D: Base
Lightly insert cap A into potion B, be careful to not apply too much force at the top of potion B.
Then turn the cap until it is completely screwed in. Stop before this applies too much force to the top of potion B.
Unscrew cap A and clean the residue from the top of potion B. Next time it will become easier to screw it back on.
Place outline C around potion B by inserting it from the top.
Then, apply glue at the 4 corners of base D put B/C on it. You may also put glue in the middle of base D.
Press the corners of base D and outline C firmly together to spread the glue and make them stick.
Once the glue has set, you can use a funnel or a piece of paper to pour a liquid into the potion B.
For a nice nogg color, water mixed with blue or green liquids works well. Up to you to find the best brew!
Then close potion B with cap A.
Project history
The Nogg is my very first project.
It started in 2019 and was what made me buy my first 3d printer after failing to re-create this potion using other materials.
It underwent a long prototyping phase with many different design attempts :
In 2023, I closed the project in the same state I'm delivering to you today on Makerworld.
It could still be improved, but the final result has reached my personal expectations, and I'm quite happy about it.
Printing notes
Due to the way the potion is printed, its upper part is a little fragile.
Be careful not to apply too much force on it so as not to break it.
The gold filament can be hard to print while maintaining its texture effect.
Lines may be visible on the walls of the gold parts.
In rare occurrences, holes may also appear.
The lower side of the gold base may contain traces left by the first layer of printing.
Happy printing !
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (14)