Lichtler87

0.2mm layer, 2 walls, 15% infill

slight gap between the two parts, but works fine. just a bump when rolling the train

Breaded

CasaEufrauzino

Height1015

cjordansmith

adrytrasgugijon

edwinavalos

cover

20241017_212716.jpg

20241017_212720.jpg

20241017_212728.jpg

20241017_213925.jpg

20241017_213952.jpg

plate_1.png

2024-10-17_79e0cc76938c3.jpg

This profile worked well with tree supports under the arches. There's a slight misalignment in the finished track but nothing that would affect the train going up and down the track. This slow incline also printed no so smoothly, with a very visible stepping line pattern up the track. If you care about that, you might need to tune things to avoid that issue. I was fine with it.&nbsp;Supports were very easy to remove. The keying was pretty easy to slide into place and will be sturdy enough once I glue them together.

Janne.

Brio Bridge Ramp, 90 Degrees Corner

This is a remix of a model that wasn&#39;t compatible with my A1 mini because the size of the finished print exceeds the dimensions the A1 mini can print.&nbsp;I took the original model and split the model into two parts that will fit on the A1 mini&#39;s plate, as well as added keying to both pieces so that they would connect to intended original model.

Brio Bridge Ramp, 90° Corner Keyed for A1 mini

ASIA

Print Profile(1)

Description

Comment & Rating (6)

This remix is based on

License

Related Models