Taycan - DJI Air Unit mount

Here's a support for the DJI Air Unit v1 adapted to the Diatone Taycan frame !
The antennas are held between the frame and the TPU.
The USB socket, bind button and SD card holder are accessible.
 

The Air Unit support is fixed to the spacers. 
It is robust and holds the VTX securely.
If, like me, you want to position the Air Unit higher up, pads are available to raise it.

To make it easier to mount an Air Unit v1 on a Taycan, I've reversed the direction of the ESCs so that the power pads for the XT60 are on the camera side. Otherwise there isn't enough place between the stack and the Air Unit.

    – Print Settings – 

Filament : TPU (Sunlu red and black in my case)

Settings : Generic TPU

Layer height = 0.2mm

Wall loops = 3

Infill = 15%

Pattern = grid 

Enable support: 
Type : tree (auto)

Style : Default

Treshold angle : 30

Remove small overhangs

No raft for the Air Unit 

Raft activated for pads (raft layers=3, Z distance =0.1mm, initial layer density=90%)

Printed on a Bambulad A1.
Not tested on other machines : let me know if it's good