Radius Gauge R1-30mm [Remix] - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

John

Tools>Measure Tools

IP Report

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

7 h

3 plates

4.8(344)

0.2mm layer, 2 walls, 15% infill

Designer

6.8 h

5 plates

4.8(19)

Print Profile for the A1 Mini

9 h

6 plates

4.8(43)

0.2mm layer, 2 walls, 99% infill

11 h

6 plates

4.6(5)

Open in Bambu Studio

Boost

529

1438

451

211

3.9 k

3.8 k

Released

Description

Remix of RestoreDoctor Radius Gauge, if you have AMS I recommend printing theirs.

Model is remixed to include cut out text markings if AMS isn't an option or you enjoy this look. Do you have a good benchy bottom? Two generated print profiles, 3plates vs. 5plates, use 5 plates if you have quality issues with utilizing the entire print bed. I recommend having wall-infill to outer/inner for the gauges but inner/outer for the case.

Comment & Rating (451)

@davegulati

These are great! The only thing I noticed is that the R06 convex is actually an "O" instead of "0" (zero), otherwise everything is perfect.

@Papadansmaman

How did you color paint the letters? When I tried, I was just able to select a invisible text...

@d4jsmit

Replying to @Papadansmaman :

I feel like I'm missing something (I'm relatively new to 3D printing) but I am having the same problem. When I load the file in Bambu Studio, the writing all disappears. Would love anyone's guidance on how to emboss these, or print in a different color (other than "load them all into Fusion 360 and modify them one triangle at a time :^) ) Any help is greatly appreciated.

@user_1887163188

Replying to @Papadansmaman :

my first thought is you could paint it in manually in the silcer but since they are indented you could also use a syringe and just fill them with nail polish (cheap resin with many color options)

@StrongAsMeat

some printed perfectly but the majority didn't. most don't fit in the case and the lettering didn't work on some. I'd love advice.

(Edited)

@The_Viking

this is very late i know but clean your build plate

@KineticKnight

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

This is my favorite use of multi-color printing. Functional and minimal waste. This set printed great and I am super happy with how they turned out. Thanks!

@user_1555873435

very nice!

@muphin

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

This is just what I needed! Works really well! Printed nicely. I added a bit of tape to the insides of the lids so they would fit a bit more snugly. Thank you!

(Edited)