usefull to people who have to measure a lot and make parts fit with existing stuff. have some customers who bring the weirdest parts into the workshop so this is a nice addition to our tool.
Had to use 3DLack to have enough bed adhesion
Thanks for the model!
don’t know what’s up with the colors but will definitely need to print again due to the obvious problem. other that that, it looks great!
I reran it, and it looks great. looks like it was just my flush volumes being off.
This is an incredibly unfair rating. This is clearly an issue with your printer not my profile. There are several pictures of the end result, and a detailed description. I don't understand how a person can have an issue with their printer or they ignore instructions and mark down my work as at fault. My profile is perfect and your 2-star rating is unfair, period. When people do this type of thing it only makes creators think twice before sharing their work.
0.2mm layer, 3 walls, 100% infill and 3 Printplates
The gauges are ok, easy to print.
The case however has some issues : it's very difficult to open (at least with my PETG filament / tolerance) - a simple "nail hole" would definitely have helped to open / manipulate the top part.
I was searching for a good and compact. radius gauge and I found it!!
The only downside is that the top lid is really loose, I would make it like a snap fit so you can carry everything from the top