JB_Design

cover

box 2.webp

box 3.webp

box 4.webp

plate_1.png

0.2mm layer, 2 walls, 15% infill

RevHazlett

20240513_035629_6ccb503f-4674-46e1-acd5-3ea80edf7d3c.webp

plate_1.webp

Prints one pair of boxes in opposing contrasting colors. The entirety of the hexes will print in one color, the body in the other. Only 11 swaps through the whole print, no prime tower since it's print-by-object (default flushing volumes worked fine for me). Other minor tweaks for quality - internal solid infill pattern, non-intersecting sparse infill (gyroid), finer first-layer line width, etc. My hinges were just a little bit crunchy but still operate smoothly, seems more than strong enough printed in eSun PLA+.

Contrasting Pair - PLA on tPEI Plate (two colors)

Print in place hinged dice box, uses four 6x3mm magnets for closure. Hinges print in place with no supports. Included is a test print to make sure your printer has the tolerances for hinges.

Magnetic hinged dice box

Supermustachio

Hinged Dice Box

ASIA

Print Profile(2)

Description

Comment & Rating (26)

License

Remixes (1)

Related Models