52-liter E-ATX/EEB Top-Mount I/O 480mm Water-Cooled Full Aluminum PC Case
Print Profile(1)
Bill of Materials
- 见附加采购清单 x 1: 见附加采购清单
Description
A full-sized case built entirely by hand requires a lot of non-3D printed parts, so be prepared for a significant undertaking before embarking on this project.
I have fully completed the construction of the case, so there are almost no areas where trial and error is needed in this set of files. However, it is impossible to completely avoid the occurrence of unreasonable structures.
The current state is sufficiently "compact" to meet my personal needs, but the dimensions can be adjusted to create other looks, such as a more compact front airflow or a shorter graphics card, as required.
In theory, it supports various shapes of USB cables. However, display cables such as HDMI and DP will require the use of elbow connectors or angled extension cables to prevent interference with the top plate (there will be no interference if the top plate is not installed).
Specific hardware support:
Motherboard: EATX/EEB
Power supply: ATX specification, length limited to 24cm
Graphics card: Length limited to 360mm (excluding the bracket), width limited to 150mm (excluding the bracket)
Radiator: 480*45mm single radiator, width limited to 125mm
Fan: 12025/12030*4+14025/14030/14038*3
Air cooler: Height limited to 150mm (you can make it slightly thicker and shorter if you really need to use an air cooler)
Recommended airflow direction: Full intake/left in, right out
Documentation (9)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)