Levoit Core mini intake adapter for 3" tubing

For printers in small flats where it isnt always possible to vent to the outside, I present the Levoit Core mini intake adapter. This prints allows for the HEPA and carbon filter and the fan side of the core mini to draw air from a tubing intake. This is paired with the X1C/P1s Magnetic Rear Vent Hose Adapter from RandomKhaos.

This has reduced significantly the amount of particulate and VOCs in the current room (from around 20-30 ug/l to 1-2 ug/l during prints). This is no perfect solution, filters need to be changed and the purifier has to be manually started before each print.

• For this, you will need about 700g of filament (here I used this PLA), 3" Air Duct (I recommend this one), the rear vent adatper from above and of couse the levoit core mini (link).