Chicago Bears LOGO Hue
Print Profile(1)
Description
The Model is 200x125.07mm in size
CAUTION WHEN CHANGING THE SIZE ONLY ADJUST Z, ADJUSTING OTHER Y AND X WILL THROW OFF THE COLORS
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA Sunlu Orange Transmission Distance: 7
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Dark Blue
At layer #10 (0.88mm) swap to Jade White
At layer #17 (1.44mm) swap to Orange
At layer #26 (2.16mm) swap to Jade White for the rest.
Boost Me (for free)
If you love this model and want to reward me with a boost I would be grateful, but I not that is perfectly fine. I use the boosts so I can get filament to make stuff for others to print. Have a wonderful day.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)