Balisong (cyberpunk style with Arasaka logo) - Free 3D Print Model

Search models, users, collections, and posts

wakedream

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.16mm layer, 2 walls, 100% infill

Designer

2.2 h

1 plate

4.4(34)

Heart Pattern - 0.16mm layer, 2 walls, 100% infill

Designer

2.2 h

1 plate

4.2(5)

Single Color - Full PLA - 0.16mm layer, 2 walls,100% infill

Designer

2.2 h

1 plate

4.3(8)

0.16mm layer, 2 walls, 100% infill

2.4 h

1 plate

4.3(15)

Open in Bambu Studio

Boost

746

1630

1.8 k

830

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

M4x12 BHCS Machine Screw (10PCS) - AA066

M4 Button Head Cap Machine Screws (BHCS)

List other parts

M4 nut x 2:

Description

This is a Balisong for practice.

The design is close to the cyberpunk style, so the Arasaka logo is added.

I believe many of you have printed the first version, and I have received many feedback.

Here are three improvements:

Added a lock at the end of the handle.
Removed the counterweight hole at the end that is difficult to install.
Removed the screw hole for the locating pin and used a locating pin integrated with the handle to reduce the need for hardware.

The current version retains the installation position of the blade counterweight block, of course, the feel is good without the counterweight block installed.

The handle shaft here uses two M4x12 screw, and the blade counterweight is an M4x32 copper rod.

Note: When inserting the counterweight copper rod, you can use a vise to force it in, but it may cause irreversible tensile deformation of the material. It is best to soften the material with boiling water or a hair dryer, so that it will be easier to insert.