Trilazer64

cover

IMG_20241001_171536034_HDR.jpg

IMG_20241001_171540747_HDR.jpg

IMG_20241001_171520933.jpg

plate_1.png

2024-10-01_34abdce813435.jpg

0.2mm layer, 2 walls, 15% infill

Marinade

WhatsApp Image 2025-01-05 at 17.16.57 (1).jpeg

WhatsApp Image 2025-01-05 at 17.16.57.jpeg

WhatsApp Image 2025-01-05 at 17.06.11.jpeg

2 bottom layers, 2 walls in total, thin but sturdy and only 26g of PLA! And it&#39;s for A1, not A1 mini but it will serve its purpose aswell :D

SuperThinContainer 0.28mm layer, 2 walls, 15% infill

HistoricalPiecesandMore

Screenshot 2024-12-07 165633.png

20241207_170253.jpg

Thinned out the walls like some people wanted

Thinned walls Container

Veteris

1728477801403.jpg

All the same settings as the other profiles but i also added in the setting to turn the infill combo on. Didn't affect the print itself as it still seemed very sturdy. Also on the printer itself I turned on the ludicrous setting for 166% speed and the time was cut down even more.

Infill combination on, 166% Speed

Colleen

IMG_4289.jpg

0.2mm layer, 2 walls, 15% infill&nbsp;Printed without support

AMS two colors, with label

plate_2.png

kryty

IMG20241208115912.jpg

0.6mm nozzle but you can just change the nozzle size. I used the highest layer height offered (0.42mm) to make the print faster.&nbsp;&nbsp;Easily sturdy enough for the job.&nbsp;With the 0.6 nozzle the deflector fits snuggly, don't think it requires any glue. Did not use vase mode on that one. Should work with 0.8mm but if it makes the deflector's walls thicker, then you might have a problem. Can't see any problems printing with a smaller nozzle other than print time being slightly longer.&nbsp;Now I just need to pick all the poop from the floor, just did a 33h33m multi material print, there's lots. No need for that again.

Fuzzy vase mode, less plastic, 0.6mm nozzle, 0.42mm layers

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

This is my updated version of my poop can! It is easily slid next to the printer and has an easily slidable poop launcher blocker so it will always land in the bucket!<boostme><boosttitle>Boost Me</boosttitle><boostcontent>It helps everyone!</boostcontent></boostme>Also, I made a store! Link: tinyurl.com/Alaska3D

Poop Bucket with Poop Stopper (A1/Mini)

Gherrapowa

Very low poop bucket

ASIA

Print Profile(6)

Description

Comment & Rating (2337)

License

Remixes (1)
(Created before license restrict)

Related Models