19" Rack Mount for UGreen DXP8800 NAS

A 19" rack frame for the UGreen DXP8800 8 Bay NAS. Takes up 5u of rack space.

The two halves of the frame go together with six M4x12 nut and bolt pairs top and another six on the bottom. Remove the feet from the NAS and use the 4 screws from the feet to lock it to the printed rack frame.

Around 22 hours of print time. I printed in BBL PLA Matte but it should be fine in PLA Basic, PETG etc. Takes about 1.3 Kg of filament and only just fits (if the slicer says it's too tall make sure precise Z height is checked).

Thank you for looking at this model.  You can find the rest of my designs here.   I really appreciate suggestions for improving my models, feel free to message me or comment.