Adjustment inserts for A1 & A1 mini shutter switch

Hello guys,

I made simple inserts for “A1 & A1 mini shutter release holder for camera” from
https://makerworld.com/en/models/591727?from=search#profileId-513474

I needed to place a smaller switch than the design specified.
In the files you will find two versions. One for a very small switch (you need to put a piece of felt behind the switch so that the switch does not move). The second version for a medium-sized switch. Both switches are shown in the pictures. Both switches were removed from selfie sticks.

Enjoy ;)