Mecha Godzilla's Workshop

cover

IMG_4281.JPEG

IMG_4282.JPEG

IMG_4283.JPEG

IMG_4284.JPEG

plate_1.png

plate_2.png

2024-09-26_64f1eefbaaca2.jpeg

<p>The print profile here is in PLA, but I used PETG HF for mine. Both work well. .2mm layer, no supports needed. You can add a brim but I did not need one. I printed on a textured PEI plate.</p>

0.2mm layer, 2 walls, 15%, Phone button relief

Josh-3D

Phone Stand - Industrial 

<p>I remixed the stand to allow you to put an Iphone 15 in the stand in the letterbox orientation and adjust the volume without the Iphone turning off. I added material so you can use 3mm brass nutserts (Bambu sells these). I prefer the nutserts over 3mm nuts.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000666177/design/2024-09-26_3cd65bdefd396.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000666177/design/2024-09-26_4005e8118e323.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000666177/design/2024-09-26_27fe58b65baa.jpeg"></figure><boostme><boosttitle>Boost Me</boosttitle></boostme><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000666177/design/2024-09-26_370b50a1e1a7e.jpeg"></figure>

Industrial Phone Stand w nutserts + button relief

ASIA

Print Profile(1)

Description

Comment & Rating (5)

This remix is based on

License

Related Models