wall / desk clock Werner Wernersen HueForge

I have made another Hueforge clock here. Maybe some of you also like this clock.
I could imagine that this watch would also be a very great gift for someone.

I created a version with 170 mm for the Wall/table and one for the Wall with 245 mm

Here you will only find the dials!
You can find the necessary accessories under the following links:

You can find suitable clock hands here:
https://makerworld.com/en/models/603977#profileId-526590

You can find the coloured back panel and further wall bracket for the 245 mm version here:
https://makerworld.com/en/models/603993#profileId-526611

You can find the coloured back and the table stand for your dial here:
https://makerworld.com/en/models/600983#profileId-523239

Would you like to put the clock on the fridge? Then visit this link:
https://makerworld.com/en/models/643115#profileId-569109

You can find an LED module for the dials here:
https://makerworld.com/en/models/643259#profileId-569271

To minimize print time without compromising quality, I configured height range modifiers in my print profiles. So don't be surprised if the swap instructions don't match the data in the print profile

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Swap Instructions:
Start with Black
At layer #26 (1.16mm) swap to Jade White
At layer #39 (1.68mm) swap to Red for the rest.

If you get the message with the floating regions when slicing... you can ignore this

Here you can find my other dials collected
https://makerworld.com/en/collections/1715414