Search models, users, collections, and posts
Picture frame with Love Sign
IP Report
Print Profile(0)
Add the first print profile to earn points
Boost
3
10
0
0
5
0
Released
Description
Picture frame with Love Sign (15x10cm/6x4").
This picture frame can be free standing or can be mounted on wall in vertical or horizontal position
( hanging and standing in two directions vertical and horizontal).
It has hangers to hang this frame on the wall.
Holes in frame should be tapped. Be careful to not damage front site during tapping.
In my prototype I used M3x6mm socket head screw because I didn't have counter sink crews in that length so on the picture there are different screws holding back plate.
I've printed this frame using Fiberlogy True Gold PLA
Fasteners needed to assemble the frame.
M3x6mm SHCS( counter sink screw) - 6pcs
M4x8mm Socket Head Screw -2pcs
Material: PLA, PETG, ABS, ASA etc.
Layer heigh: 0,2 or lower
No supports needed.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)