Hueforge Backplate Groot for Mobile Phone Stand

Here I created another Hueforge back plate for my cell phone stand. I hope you like it. This might also be suitable as a gift for someone.

To minimize print time without compromising quality, I configured height range modifiers in my print profiles. So don't be surprised if the swap instructions don't match the data in the print profile

Here you will only find the back plate for the stand!
If you still need the stand, follow this link:
https://makerworld.com/en/models/641561#profileId-567550

Here you can find all the designs for my mobile phone stand
https://makerworld.com/en/collections/2377233

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Swap Instructions:
Start with Black
At layer #48 (2.04mm) swap to Dark Brown
At layer #54 (2.28mm) swap to Beige
At layer #59 (2.48mm) swap to White for the rest.

If you get the message with the floating regions when slicing... you can ignore this

By the way, I also make watches out of Hueforge! You can find them here
https://makerworld.com/en/collections/1715414