Crappie (hueforge)
Print Profile(1)
Description
Crappie (hueforge). Show your love of fishing with this great print. This is a 4 color print, and prints pretty quickly.
If you have some suggestions or other Fish you might want, feel free to messaging me.
If you use the above print profile, it's sliced so the bottom layers are thicker to save time (saves about an hour). if you are setting up on a different printer use the information below to set the layers after you slice. Thanks.
See Printing instructions below.
you can scale to any size you want, but make sure you don't change the “Z” axis or it will throw off the color sequence.
Need a way to display theses? check out my Wall Mounted Modular Hueforge Display complete it with the optional Desk Mount
Printing Instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu Silver Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Grey
At layer #11 (0.96mm) swap to Silver
At layer #15 (1.28mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)