Search models, users, collections, and posts
IMPROVED A1/A1 Mini Hotend Storage Box
IP Report
Print Profile(2)
SINGLE COLOR - 0.2mm layer, 2 walls, 8% infill
Designer
2.3 h
1 plate
DUAL COLOR - 0.2mm layer, 2 walls, 8% infill
Designer
2.5 h
1 plate
Open in Bambu Studio
Boost
114
320
92
55
641
445
Released
Description
IMPROVED VERSION: A common complaint with the original model was that the hotends were too difficult to remove from the box. To address this, I have added holes on the bottom to push the hotends out with your finger, making it much easier and quicker to access the hotends. I have also modified the model to eliminate the need for supports.
Original model link: https://makerworld.com/en/models/472402
This model was designed to hold your spare hotends for the A1/A1 Mini. It features 4 slots and a cutout in the middle to allow for easy access.
If you have an AMS, the model can be printed with colored “Bambu Lab” lettering.
There is also a single color profile for non-AMS users.
Designed by me in Onshape.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (92)