Dho Gazza trap folding arms
Print Profile(1)
Bill of Materials
- Coarse 8-32 nylon lock nut x 2:
- 8-32x3/4 Flat Head Phillips screws x 2:
- 1/4x3/4 Flat Head Machine Screws x 2:
- 3/4 square tube aluminum x 1:
- 1/4x12" aluminum flat bar x 2:
- driveway snow markers 48" x 2:
Description
PRINT IN PETG
These are folding/adjustable arms for a Dho Gaza. To complete the build you will need the following from a hardware store:
2 x 1/4 " driveway markers
1 x 48" ¾ aluminum square tube
2x ¼ aluminum flat bar
1x Dho Gazza net
The holes in the arm are meant for a ¼ x 3" detent pin.
Cut the driveway markers to the correct height. I have a design for end caps for them
To assemble print two arms, place them on the square tube as a guide and drill the first two holds on the left of the arm, then on very last hole on the right.
To secure the flat bar to the assembly, drill whatever diameter hole desired on the bottom of the square tube and through the flat bar.
To secure the fiberglass rods to the arms, I used ¼ steel tube with a nut welded to the bottom. I will likely design something that can be 3D printed, so please hold tight.
I have included a picture of the hardware used. If you need further assistance, please feel free to contact me.
It made me put the nylon cord in the parts, you don't need it.
License
Comment & Rating (3)