Micro sanding blocks with tightening

Here are really micro sanding blocks. :)

I had a request for something small with a short piece of sandpaper. So here they are!

My father in low loves it, he makes Revell 1:48 models. :)

10mm wide sanding block for 120mm long sandpaper - only 4 grams and 13min printing time

15mm wide sanding block for 170mm long sandpaper - only 10 grams and 24min printing time

It's very easy to assemble. 

All you need is just M3x8mm hexagon socket screw for 10mm version and M3x10mm hexagon socket screw for 15mm version

.

Be careful - the screw is mounted right to the plastic so be careful when tightening.

I hope you find it useful :)

Everything is designed for printing with standard 0.2mm profile of PLA or PETG and without support.

If you want some specific shapes of sanding blocks, please leave me a note or comment and I will make it for you.

You can check my standard and larger version of sanding blocks

here https://makerworld.com/en/models/616112#profileId-539573 :)

and

here: https://makerworld.com/en/models/619219#profileId-543139

and my Filament and PTFE tube cutter :) https://makerworld.com/en/models/568082#profileId-487887