PLA SILK GLOSS TEST
This test is based on the speed of the external wall to be used to have the desired shine, uniform and without changes for materials such as pla silk and other materials that vary their shine based on shape, thickness and overhangs.
Select your filament already set and calibrated before the slice and launch the print.
Once the printing is complete, check the maximum speed of the best external wall, to be able to set it in the printing parameters.
gloss affects the outer wall, so the other parameters can also be unchanged.
Another factor to try is temperature. Sometimes even raising the temperature by 10°C can make the finish shinier.
All that remains is to try.
printed in 27 min(33 with print preparation)
13,64 gr/ 3 lb