eSun PLA+ Temperature Tower (210 - 230 °C)
eSun PLA+ Temperature Tower (210 - 230 °C)
Print Profile(1)
Description
As many have asked for it, here is the PLA+ Temperature Tower (e.g. eSun).
PLA+ Test for 210 - 230 °C
------
Check out my other temperature towers:
Normal PLA: https://makerworld.com/en/models/506049#profileId-421778
PETG: https://makerworld.com/en/models/512668#profileId-428764
------
The attached .3mf file contains the corresponding gcode for the Heat-Temperature-Tower.
The print takes about 2 hours (tested on my BambuLab A1).
Instructions:
0. Use a Mac / PC. The mobile app does not support custom gcode.
1. Click “Open in Bambu Studio” or download the .3mf file via the drop-down arrow text to “Download or Print” and select “Download STL”.
2. (Open the .3mf file with Bambu Studio) Click on "slice plate" and then on "print plate".
3. After the print is finished, you can evaluate the temperature tower in terms of stringing, accuracy (e.g. overhangs, cones etc.).
4. It also makes sense to evaluate the temperature tower destructively. For example, you can use pliers to break off individual layers of each temperature range and find the optimum layer strength for your PETG.
------
My temperature tower tests the (eSun) PLA+ with linear overhang (35° & 45°), radial overhang (4 mm & 6 mm radius), bridging, stringing, cones / circles and simulates "drill holes" and much more.
NutellaPizza
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
