Mini Bowling / Mini Golf - Free 3D Print Model

Search models, users, collections, and posts

Tyler Y

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

4.9 h

2 plates

4.5(27)

Open in Bambu Studio

Boost

403

879

861

414

Released

Description

Mini bowling or mini golf. Whichever you prefer.

- Pins are scaled to have the same size ratio as a typical 10 pin bowling alley (with a standard golf ball).

- Pin spacing is such that the center of pins 1-7-10 form a 4.5" circle, which is the size of a regulation golf hole (this also makes strikes possible with the given collision physics).

Note: Pins printed with 100% infill (PLA) are still approximately ⅓ the weight they should be for proper scaling purposes.

Boost Me (for free)

Comment & Rating (29)

@user_1350999914

Print Profile

0.2mm layer, 3 walls, 15% infill

tried to do 2 separate prints and they fall off of the mat around the 50% mark.

Other Issues:needs bottom support

@user_1443436829

Print Profile

0.2mm layer, 3 walls, 15% infill

Did not finish printing the desired object

Show original

@Ribyx

Print Profile

0.2mm layer, 3 walls, 15% infill

@Gooseman58

could you make a model without the pin setter? and what scale is this to?

(Edited)

The designer has replied

@TylerY

The pins and pin setter are placed on different build plate so you should be able to selectively choose which you want to print. Specifically, the pins are scaled to 0.1955:1, however, the pin spacing was reduced to improve collision physics.

@user_3512460318

Print Profile

0.2mm layer, 3 walls, 15% infill

works

@user_2041551243

Print Profile

0.2mm layer, 3 walls, 15% infill

This is a great model. I only left off one star because the pins will not stand up on a putting matt. I'm trying to figure out what to do about that.

@boschimmel

Print Profile

0.2mm layer, 3 walls, 15% infill

simple to print

@Honsi

Print Profile

0.2mm layer, 3 walls, 15% infill

Good print but somewhat unstable

Show original

@EckNillHan

Print Profile

0.2mm layer, 3 walls, 15% infill

@Flatfoot45

Print Profile

0.2mm layer, 3 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.