Blood Raven Three-Eyed Crow Hueforge

Thanks for checking out my hueforge! Plz leave a like and share :)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 176.04x251.23mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Duramic 3D Wine Red Transmission Distance: 0.6
PLA 3DHojor Black Transmission Distance: 3
PLA LOTMAXX Matte Gray Transmission Distance: 1.5
PLA 3DHojor White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Red
At layer #8 (0.72mm) swap to Black
At layer #13 (1.12mm) swap to Ash Gray
At layer #20 (1.68mm) swap to Jade White for the rest.