Milwaukee M18 Tool Battery Holder Mount with Logo - Free 3D Print Model

Search models, users, collections, and posts

Coconut

Tools>Other Tools

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 5 walls, 15% infill

Designer

4.1 h

1 plate

5.0(34)

Open in Bambu Studio

Boost

309

861

923

375

Released

Description

Membership

If you are interested in printing these to sell, please join my Commercial License. Thank you!

Join

Boost Me (for free)

Please consider Boosting this greatly helps offset the material cost to make these for folks.

Here is a Milwaukee Battery Holder. It has the Milwaukee and M18 Logo on the top.

Mounting:

Method 1 - Screws from front - For screws use #8 to #10 Screws.

Method 2 - Nuts from front and bolts from back - The hex features will except 3/8" nuts (#10).

Printing/Design:

The design was made to reduce material by having very little honeycombing for supports. It is mostly hollow with support rails placed near load points. It prints with the logo facing down to save material, improve cosmetics and speed up the print.

Check out my many other designs. If you are looking for a variation just DM me or leave a comment. I try to accommodate as time permits. Thanks!

Logo not for commercial use. Fan Art only.

Boost Me (for free)

Boost me to support more free designs. I use it towards material and do take many requests from folks.

Comment & Rating (53)

@mishockwave2008

Boosted

Outstanding design. Love it. I printed 5 of these out of PETG and they work great. I showed off your design at work and everyone was super impressed. Well done!!

The designer has replied

@Coconut

I am glad it worked out for you. I made it for my tool and gave some to my friends, so I figured I would post it. Thanks for the boost!

@GoPackGo

Boosted

Print Profile

0.16mm layer, 5 walls, 15% infill

turned out perfect! love the holder! can’t wait to see what else you come up with!

The profile uploader has replied

@Coconut

thanks for the feedback

@user_792566938

Boosted

Print Profile

0.16mm layer, 5 walls, 15% infill

printed nicely without issues.

The profile uploader has replied

@Coconut

look great!!! thanks for the boost

@mishockwave2008

Boosted

Print Profile

0.16mm layer, 5 walls, 15% infill

Outstanding design!! I showed the printed holder around at work an everyone was super impressed. I eventually printed 5 of these in PETG and love them. Thanks for the all your hard work.

@JoshRobinson

Print Profile

0.16mm layer, 5 walls, 15% infill

great fit and awesome detail!!

@Xxdestruccionxx

Boosted

They turned out perfect

Show original

@bow_hunter01

it's a LOT of filament

(Edited)

@wemakethings419

Boosted

Milwaukee 4 life

The designer has replied

@Coconut

thank you!

@pantherXL

Print Profile

0.16mm layer, 5 walls, 15% infill

these work great and look awesome, great job

The profile uploader has replied

@Coconut

thanks!!

@user_3086117069

Boosted

great work

The designer has replied

@Coconut

Thank you!

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.