Cat Food Lid - Any size

Cat Food Lid

Super cute Lid! I recommend using my printable template. For successful printing, please read the description.

Test your printer's capabilities! Even such a small colored parts can be printed perfectly with a 0.4 nozzle!

I tried to choose the most common colors that everyone who owns an AMS system should have. The model consists of many elements, but you only need to choose 4 colors and send it to print.

Only 4 color changes and minimal poop waste, about 1 gram!

The print profile is for 7.5 cm cans, but if you need bigger…

If you need a different diameter, measure the diameter of your can and reduce it in Bambu Studio by 0.1mm!

Works great with BambuLab PLA plastic.

I recommend using a textured plate (this will hide most of the imperfect nuances).

I highly recommend using Fairy for your baseplate before printing (for this type of printing Fairy will be your best friend, I'm not kidding, works better than superglue and leaves no residue).

If you need a clips for you or your pets - Click here https://makerworld.com/en/models/602932#profileId-525406

Important:
A well calibrated printer is absolutely necessary for this model. Before printing, be sure to carry out a flow dynamics calibration. I recommend to use alcohol for cleaning bed plate or wash it with Fairy (better).

If you like it, please leave a comment and share a photo of your print.

So, if you have a well calibrated printer and your baseplate has been washed with Fairy (or similar product), you will have a perfect small print.

Enjoy!