Clip for Pet Treats (and Yours)

Clip for treats, snacks and more!

Meet the super cute clip! I recommend using my printable template. For successful printing, please read the description.

Test your printer's capabilities! Even such a small colored parts can be printed perfectly with a 0.4 nozzle!

The bigger the model, the better the print quality. You can do bigger, but I don’t recommend doing smaller (the details will be lost).

Your friends and family will definitely enjoy these clips! Even my cats like them :)

I tried to choose the most common colors that everyone who owns an AMS system should have. The model consists of many elements, but you only need to choose 4 colors and send it to print.

Only 4 color changes and minimal poop waste, about 1 gram!

Works great with BambuLab PLA plastic. 

For a decorative colored part, I recommend using a textured plate (this will hide most of the imperfect nuances + the clip will not be scratched), and for a technical clip - a smooth one (however, with a textured one will works too).

I highly recommend using Fairy for your baseplate before printing (for this type of printing Fairy will be your best friend, I'm not kidding, works better than superglue and leaves no residue).

The clip attaches to the decorative part very tightly, so you don't need superglue. Push the clip in as far as you can in your hands and then press on the Top with your finger (as in the photo).

If you need a Lids for you or your pets - Click here https://makerworld.com/en/models/610638#profileId-533733

Important:
A well calibrated printer is absolutely necessary for this model. Before printing, be sure to carry out a flow dynamics calibration. I recommend to use alcohol for cleaning bed plate or wash it with Fairy. The model is off-center to allow better adhesion of the first layer (since most of your prints are centered).

If you like it, please leave a comment and share a photo of your print.

Updated Settings just added, print quality is much better now! I added a modifier to allow the first and last layer to be ironed (look at the images to see the difference). Compatible with A1 Mini.

So, if you have a well calibrated printer and your baseplate has been washed with Fairy (or similar product), you will have a perfect small print.

Enjoy!