Angelaufsatz Geocaching

Update 15.01.25:

I have added a version for M6 nuts/bolts

-------------------------------------------------------

For assembly, depending on whether you use an M4 or M5 thread, simply print the respective STL file twice and assemble it. I additionally bonded the two halves with superglue. Optionally, the attachment can be secured in the lower area with two M3x10 screws.

For this fishing attachment you will need:

• 1x M4x20 or M5x20 screw with a countersunk head
• 1x M4 or M5 nut

Optional for improved durability:

• 2x M3 nut
• 2x M3x10 screw with a countersunk head

Printing:

Layer height: ~0.12

Supports: Yes for the screw heads

Brim: No

Infill: 100%

Material: PETG (PLA naturally also works)