Single cable feedthrough 68mm adjustable/Cable entry

Hello everyone,

here::

https://makerworld.com/en/models/595897#profileId-517848

I had already created the double feed-through! Here is the single feed-through in the matching design, of course you can adjust the dimensions as you wish. You can also create a triple feed-through

Two printing plates are prepared, one for 15mm and one for 40mm plate thickness

However, you can set up all the objects yourself as you wish:

Here are also the matching lids, with and without cable feed-through:

https://makerworld.com/en/models/596199#profileId-518153

Have fun with it

PS: I would be very happy about a review and / or pictures. Thanks for that

Google Translate:

Hello everyone,
here::
https://makerworld.com/en/models/595897#profileId-517848

I had already created the double feedthrough! Here is the single feedthrough in the appropriate design, of course you can choose the dimensions you want. You can also create a three-way feedthrough.

2 printing plates are prepared, one for 15mm and one for 40mm plate thickness.

But you can set up all the objects yourself as you like:

Here are also the matching lids, with and without cable feedthrough:

https://makerworld.com/en/models/596199#profileId-518153

Have fun with it.

PS: I would be very happy to receive a review and/or pictures. Thank you for that.

Bonjour à tous,
ici::
https://makerworld.com/en/models/595897#profileId-517848

J'avais créé la double traversée ! Voici la mise en œuvre individuelle dans la conception appropriée, vous pouvez bien sûr choisir les dimensions souhaitées. Créez également une implémentation à trois voies.

Deux plaques d'impression sont préparées, une pour une épaisseur de plaque de 15 mm et une pour une épaisseur de plaque de 40 mm.

Mais vous pouvez configurer vous-même tous les objets à votre guise :

Voici également les caches assortis, avec et sans entrée de câble :
https://makerworld.com/en/models/596199#profileId-518153

Amusez-vous avec.

PS : je serais très heureux d’avoir un avis et/ou des photos. Merci pour ça.

大家好，
這裡：：
https://makerworld.com/en/models/595897#profileId-517848

我已經創建了雙饋通！這裡是在適當設計中的單獨實現，當然您可以選擇您想要的尺寸。還創建一個三路實現。

準備兩塊印刷板，一塊為15mm，另一塊為40mm板厚。

但您可以根據自己的喜好自行設定所有物件：

這裡還有配套的蓋板，有或沒有電纜入口：
https://makerworld.com/en/models/596199#profileId-518153

玩得開心。

PS：我會很高興收到評論和/或圖片。謝謝你。