SpectreGadget

More force 0.2mm layer, 3 walls, 20% infill

Flamingocharm708

great for giving to my brother in a battle for an unfair advantage

Mrtechno0017

Standard Force 0.2mm layer, 3 walls, 20% infill

user_1726331602

luke

theGlitch

came out great, the brim did make the mechanism hard to use at first but overall a great and enjoyable print. 

jkampman

it only holds the one shot in the front.

i did see a guy made a repeating p90. i think it shoots balls about airsoft size.

legofreak152003

Beserker34

you might try putting a piece of PTFE tube in the barrel to hold toothpicks.

Noobmaster

ChookenBurger

cover

plate_1.png

Deploy

IMG_0359.webp

plate_1.webp

1 Plate&nbsp;Stronger Force&nbsp;<ul><li>4 Darts</li><li>Gun</li><li>Scope</li><li>Sight</li></ul>I added a brim to everything just as a bit of extra security, you can remove this if you feel it isn't needed. You can also orientate the darts if you have difficulty printing upright.&nbsp;0.20mm Layer Height3 Walls20% Infill

1 Plate&nbsp;Standard Force&nbsp;<ul><li>4 Darts</li><li>Gun</li><li>Scope</li><li>Sight</li></ul>I added a brim to everything just as a bit of extra security, you can remove this if you feel it isn't needed. You can also re-orientate the darts if you have difficulty printing upright.&nbsp;0.20mm Layer Height3 Walls20% Infill

inspired by mark rober's design. this is my own design of a p90 with similar mechanisms

Print Profile(2)

Description

Comment & Rating (61)

License

Remixes (1)

Related Models

Compliant Nerf Blaster P90