Box with lid and latch

Search models, users, collections, and posts

ledzz

Household>Other House Models

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

2 h

1 plate

4.8(178)

Open in Bambu Studio

Boost

567

1534

202

130

4.3 k

1.9 k

Released

Description

Prints without supports and any additional parts, you can just insert the lid into box.

The size is 160x80x30mm.

If you want to customize it or add separators, please take a look at my Parametric Box

Boost Me (for free)

box

lid

latch

Comment & Rating (202)

@user_248244803

Print Profile

0.2mm layer, 2 walls, 15% infill

Stylish and simple box Unfortunately there were some printing issues at the corners But perhaps the problem was my filament/printer Nevertheless I am satisfied and say THANK YOU 🙏

Show original

@user_4034614556

@user_248244803 did you try slowing down the print at the corners? I’ve noticed if I slow down the prints the lines vanish and I have no issues with the edges.

@cb_3dp

Replying to @user_4034614556 :

How do you tell the print to slow down at the corners? I printed it on my A1 AMS with whatever the default settings were in the file and I had the same rough issues at the corners.

@user_4034614556

Replying to @cb_3dp :

you go into the settings and change the speed of the lower print. make sure you have good adhesion on the corners as well.

@bloodyredstone

Print Profile

0.2mm layer, 2 walls, 15% infill

Turned out good, just needed to add mouse ears because of some warping

@user_2591693707

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect box for my sewing machine accessories!

@user_2612569072

Boosted

I remixed this to add a few things I needed. The lit is super secure and this was perfect for me after some tweaks

@Andre_LO

Print Profile

0.2mm layer, 2 walls, 15% infill

The practical tin for on the go. This way, panty liners can be discreetly taken along. Thank you for the easy print. I am VERY satisfied. ☺️

Show original

@graham_wright

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Great print. Perfect size for storing and Arduino Uno and power lead. Thanks

@user_1174028102

Print Profile

0.2mm layer, 2 walls, 15% infill

Scaled this up in Bambu Studio, to get a box 180mm long to replace my disintegrated original case (see pictures) Nice strong case, latch and hinges, as you can see I have a new case for my screwdriver/ bit set :-) Used Sunlu PETG and generic PETG settings. The case itself came off the plate cleanly, leaving behind the supports as you can see. Case and lid fitted together perfectly, thank you :-)

@PrintlyMade

I printed your box after adjusting it in the parametric tool. It worked perfect. Thank you!

@mikeeri

Print Profile

0.2mm layer, 2 walls, 15% infill

printer great and easy to assemble.

@ThreeBeerKweah

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.