milwaukee battery holder - Free 3D Print Model

Search models, users, collections, and posts

Smarty

Tools>Hand Tools

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

1.5 h

1 plate

4.9(155)

Open in Bambu Studio

Boost

228

604

184

1.8 k

1.3 k

Released

Description

A Milwaukee battery holder which can be mounted onto any surface to holder your battery

The battery holder has the notches in it so your battery clicks into place and will not fall out

there is enough clearance that you are able to mount it on any surface and enough so you don't have to mount it on the edge of you're table and you can mount it as far back as you like

Disclaimer: this is not a genuine Milwaukee product this is a version i have made myself and i am not selling it and it is a free product

Comment & Rating (184)

@Adamko

Print Profile

0.2mm layer, 2 walls, 15% infill

worked great first try. very good print profile. No issues.

@Rayudhernandez0

did you use PLA or PETG? that looks really smooth

(Edited)

@Adamko

Replying to @Rayudhernandez0 :

This was printed in PLA. I found out that for battery holders PLA is strong enough for me. For tool holders I usualy use PETG, I printed it at very slow speeds and it really made it look very smooth. Filament is just som rubbish PLA that I bought for 10€

@jkipp2

Print Profile

0.2mm layer, 2 walls, 15% infill

These work great. Simple, easy to print. Study and lock in well.

@elliott.scott.r

Print Profile

0.2mm layer, 2 walls, 15% infill

Have not tried it yet. Printed nice. Thanks.

The profile uploader has replied

@Smarty

did u end up trying it? and does the battery slot in nice and easy and then come out easy aswell?

@Daniel_2014.

I printed in PETG come back 15 minutes later to this 😭😭😭

@Tramm

Print Profile

0.2mm layer, 2 walls, 15% infill

Good

@user_2530570253

These are great. getting the tools dialed in and these for perfect for my batteries while allowing me to do my own cabinet layout. thank you.

@VkvitV

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Like a Swiss watch.

@user_1504101278

Print Profile

0.2mm layer, 2 walls, 15% infill

good result using PLA basics filament

@VeteranMade3D

Print Profile

0.2mm layer, 2 walls, 15% infill

Very well made and strong. the screw holes are right on point and the locking feature is nice. I printed these from PLA and no issues. Supports are easily removed with a flat blade screwdriver! Nicely done!

@user_7152336

Print Profile

0.2mm layer, 2 walls, 15% infill

I used this part to try several different materials. PLA, PETG HF, PC and ASA all worked good. PAHT-CF printed too small and would not work with the battery.