SCART Brace for RetroTINK RGB2COMP

SCART. It delivers fantastic crispy video, but the gentlest breeze will knock the connector loose. Keep the SCART connector in place on your RGB2COMP with this SCART-Brace.

This is designed to be compatible with standard generic SCART heads. It will not fit over larger heads such as those held together with screws, and metal heads.

Printing:

• Use Duramic 3D PLA or equivalent
• 0.4mm nozzle, 0.2mm height, 15%+ infill, 2+ walls
• No brim or supports necessary

Assembly:

• Insert your male SCART cable into the RGB2COMP.
• Drop the SCART-Brace over the top.

Note: Amazon links are affiliates.