Amazon Basics Electric Screwdriver Case (Denali) - Free 3D Print Model

Search models, users, collections, and posts

eclien

Tools>Hand Tools

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.28mm layer, 2 walls, 8% infill

Designer

4.6 h

3 plates

4.9(35)

0.28mm layer, 2 walls, 8% infill

4.6 h

3 plates

5.0(1)

Open in Bambu Studio

Boost

109

216

404

238

Released

Description

I purchased an Amazon Basics 4V Electric Screwdriver based on the recommendation of several people I trust. I can say I am not disappointed. The driver works great and has far more torque than I expected. The only issue is there was no case included.

That's ok because I enjoy this sort of design work. Here is my attempt at a portable case for this tool. I have included a single color and multicolor case variation. I have included the models in STEP and STL so you can modify it in your favorite CAD package to fit your needs. I have also linked the native Onshape file below if you utilize that cad package like me.

Link to the driver: https://www.amazon.com/dp/B09PFCX8Q1/

Onshape CAD file: https://cad.onshape.com/documents/daf39304cce732eceeee81f5/w/fe2a604662f554bc3a21e305/e/e0764a4e6599a64b8c1ebda3?renderMode=0&uiState=66c21d73a1e777135fe1b027

Update: per a user request I have added an alternate version which uses Qty:2 - 6mmx2mm magnets to retain the lid while closed. It is located in the “Alternate Version - Magnetic Lid” folder as STEP files.

Comment & Rating (74)

@peterg_CA

Boosted

Print Profile

0.28mm layer, 2 walls, 8% infill

Perfect print and super cool design with the image on top however I wish it ‘clicked’ into the bottom or something to hold on when picking it up/moving it around.

The profile uploader has replied

@eclien

I use mine in a rolling tool chest, so I wanted mine to pull off easier. Any chance you would want to modify the Onshape to make a remix with a snap feature to share with others?

@peterg_CA

Boosted

I can try but I’m brand new to this so it may be a while to figure things out. it’s still a great item!

@AMS_Dark

Boosted

Fantastic, thank you so much! I printed the version with the magnet holes but magnets won't arrive until tomorrow. The lid doesn't feel too tight, although it does pick up the bit driver extension as you can see in the first photo. The other issue I ran into is that it requires all the bits to be pushed fully into the holder or the lid won't close fully. When I got mine, they were all only pushed in about half-way. Pushing them fully is fine, it just means they're a lot harder to get out. So I guess a minor improvement/suggestion would be to allow a little more room above the bits, but certainly not worth a reprint! Thanks again! I printed on the A1 Mini even though they're no profile for it. In the desktop app I just used the "arrange" button and it put the model diagonal and it fit perfectly. Elegoo PLA.

(Edited)

The designer has replied

@eclien

Hmm, my hex bit adapter fits looser than that. Looks like I should add tolerance for MFG tolerance variations. And I did make the pocket short so the bit didn't rattle around. I know this makes it so the bits have to sit down fully. I can look into what it would take to make the pocket deeper. Do you have a suggestion for the height of pocket you would like to see?

@AMS_Dark

Boosted

I do not. I will just push them all the way down. The issue certainly doesn’t warrant a reprint in my opinion, just wanted to let you know. thanks again!

@AMS_Dark

Boosted

Replying to @eclien :

The magnets came in the mail today. I needed a hammer+punch to push them in, it was a tight fit. I don't think two sets of these are strong enough to hold the lid on very well. If I leave the case empty, put the lid on, then hold it upside down, the lid just falls off. The magnets are sticking, they're just not powerful enough even to hold the weight of the lid. Maybe bigger magnet holes and additional one in the blank space in the upper right? In any case I'm still really happy with the print and I'm not inclined to print it again. Thanks again! Update: Upon further inspection I found that the magnets I ordered are actually only 1.66mm tall, not 2mm, so that's probably why they don't hold well (probably not fully sticking to each other). 🤷

(Edited)

@bringle

Boosted

Print Profile

0.28mm layer, 2 walls, 8% infill

awesome case, everything fits great!

@CorneliousJD

Boosted

Print Profile

0.28mm layer, 2 walls, 8% infill

Amazing design and print. Particularly loved the cover with the device on it!

The profile uploader has replied

@eclien

Looking good. Thanks for sharing the make!

@MRein

Excellent work. Since you so kindly supplied the STEP file, I used it to slightly increase the length of the bit extender cutout and increase the depth of the bit holder cutout in the lid since I was getting a small amount of interference in those two areas. I also embossed some slots in the side of the lid to allow a better grip. The slots were not entirely successful because of the overhang, but they work well enough and I was too lazy to go back and use a better slot profile.

(Edited)

@user_2469004741

Boosted

This case printed very well with PLA and aside from from some very minor sanding to keep the extension socket from getting stuck in the lid. I prefer this actually, because it let me quickly make it so the extension does not rattle, nor stick to the lid. It's perfect. Thank You!

The designer has replied

@eclien

I love the use of the textured plate. adds a nice flare.

@chrisperry.wv

Boosted

Turned out fantastic! boosted.

@Tobaccula

Boosted

Print Profile

0.28mm layer, 2 walls, 8% infill

thanks, printed great

@user_3193382092

Outstanding design! Talk about perfect fit!! Thank you so much for making and sharing this. It totally completed my new screwdriver. This is awesome work!

@ThatOneGuy87

Boosted

Print Profile

0.28mm layer, 2 walls, 8% infill

Very nice print. Only thing I could complain about is the magnetic bit is a little tight in the case. a little sanding took care of it. Did some sanding on the inside of the lid to help it come of the base smoother as well

The profile uploader has replied

@eclien

Someone else mentioned their magnet was tight too. Mine is actually a loose fit, so they must have variation in the hex drivers they send. I need to get the model updated to loosen up the tolerance on that since there's no reason it needs to be tight.