Logitech G920 replacement clamp

Stronger than original Logitech replacement clamp.
Working thread,

No snapping through over tightening unlike the original.

designed for my sons G920 as he snapped the original and then another set purchased from an online auction site so I made this much stronger and they have yet to be broken 18 months of abuse.  This will also work for the G920 G923 G29 G27.

Works on Logitech DFGT

These can be a bit difficult to replace but there are a load of videos on YouTube to help. I was able to fit by just by removing the 8 or so screws on the underside unscrewing the clamp and they then just pulled through! The original screws can be tight to fit so PLEASE take your time running the screw through the threads a few times before placing in the wheel base.

Any problems message me and I'll help where I can.

I also have other Logitech G920 G923 G29 G27 parts original size clamp, and extension of the clamp, spacers and a tool to help tighten the original screws just clink the image of the part you want and it will take you to that print profile. Or visit my home page and find them there. 

Replacement screws for desk clamp.

Extended clamp for Logitech G920 G923 G29 G27.

Spanner to aid in tightening the ORIGINAL screws on wheel base.

Clamp spacers for either of my clamps also fit the original. 

We like to see your likes, comments and pictures. And all Boosts are really appreciated. 

All BOOSTS are appreciated.