Tech Deck Fingerboard Wheels 4mm - Free 3D Print Model

Search models, users, collections, and posts

CrazySinith

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(1)

All

X1 Carbon

X1E

P1S

H2D

H2C

H2D Pro

H2S

A1 mini

P1P

P2S

X2D

A2L

0.08mm layer, 2 walls, 15% infill

Designer

17 min

1 plate

4.9(16)

Open in Bambu Studio

Boost

177

317

584

368

Released

Description

I figured since my old prototype board is on here, I should go ahead and put the wheels up. I sell resin versions of these wheels on Etsy. The bearing is going to be very tight. I had to do this to get mine in.

You can print them slightly larger to fit them in there, but this press-fit design prevents any need for glue. If you're looking for the bearings, they can be found here https://amzn.to/4tBBp5E .

Overall, I am very happy with the outcome, and I hope you are too. If you'd like to support me, consider checking out one of my Kindle books on Amazon. I've got FDM and Resin books, but I also have books on random stuff like compasses, better habit building, and DSLR cameras.

Comment & Rating (33)

@user_2679683789

Thanks a lot ! fit straight away and clean result :) !! (just took the bearings of the previous wheels in order to change color just for fun)

@Yuyi96

What material did you use to print them

Show original

@anoku

Great model. Printed it with 0.2mm nozzle, 0.06mm layer height and two different seam positions. Also the bearings fit perfectly.

@fab_studios_cia

Print Profile

0.08mm layer, 2 walls, 15% infill

works great!

@ENU74

Print Profile

0.08mm layer, 2 walls, 15% infill

easy print

@SirPrintsAlot01

What size bearings are needed for these?

The designer has replied

@sinithw

These are the bearings I use as in my research these came up frequently for "tech deck bearings" https://amzn.to/3RrBFmN

@user_559224861

681xzz

@tri_studio_

Print Profile

0.08mm layer, 2 walls, 15% infill

Good print!

The profile uploader has replied

@sinithw

Thank you. Good comment!

@user_2354964925

Print Profile

0.08mm layer, 2 walls, 15% infill

Printed them in PLA and the bearing fit perfectly, I wonder if I print it with a 0.2 nozzle or wih TPU how they will come out. I'll update at some point :)

The profile uploader has replied

@sinithw

Thanks for the review. I have not acquired a 0.2 nozzle nor printed anything in TPU, so I'll be looking forward to your update.

@user_1689671510

where can I get the trucks?

@user_333320118

where do I get bearings from

@user_333320118

weren’t usable because of no thing in the back to stop the bearings coming through

The designer has replied

@sinithw

There is a thing to prevent the bearing from going all the way through. It is possible to confuse this with an inner-brim, but if you look at the default model, you will find there is something on the inside.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.