Print in Place Mini Skateboard (Tech Deck) by An1lo

An1lo

Household>Office

IP Report

Print Profile(2)

All

H2D

P1S

P1P

X1 Carbon

X1E

A1 mini

0.1mm layer, with brim

Designer

1.1 h

1 plate

5.0(6)

1 hour print (0.1mm layer height, 100% infill)

Designer

1.1 h

1 plate

2.6(17)

Open in Bambu Studio

Boost

264

474

448

204

Released

Description

Fully functional print in place mini skateboard. Print it with solid infill to make sure it's strong enough or use the provided print profile. The wheels are fully functional and turn. Do make sure you use a low layer height (I recommend 0.1 or 0.08mm) for better overhangs near the build plate, Also I noticed that the wheels might get stuck if you use higher layer heights.

Made this because I wasn't happy with the existing Tech Deck models online.

You might not need a brim. I printed this on my Bambulab A1 and didn't need a brim, your mileage may vary.

EDIT: I added a print profile with a brim. If you have issues with bed adhesion pick the new print profile with a brim!

Comment & Rating (49)

@CptAwsm

Boosted

Print Profile

0.1mm layer, with brim

Improved profile, everything worked flawlessly

Show original

@An1lo

That looks great! Thanks for your rating and I'm glad the new profile worked out for you!

@sedhead

Boosted

Print Profile

0.1mm layer, with brim

printed PETG. bring back the days of playing with tech decks in school many years ago.

@erre_pataki

Boosted

thanks, nice man

The designer has replied

@An1lo

Thank you for the boost! Glad you like it

@erre_pataki

Boosted

Replying to @An1lo :

all my people loved it

@SteinerzPrintz

6 times it fails printed it one time on each x 1 carbon I own all with a different build plate material that was fresh clean

The designer has replied

@An1lo

You could try slowing the print down. The print profile worked flawlessly on my A1

@An1lo

Added a new print profile with a brim!

@kklinke

Tried twice, got spaghetti both times and I cleaned the plate thoroughly before the second attempt. I think this needs a brim or something to help the first layer but I did not try that

The designer has replied

@An1lo

Yeah I'll add a print profile with a brim soon. You could also try to slow the print down, maybe that will work. It was not an issue on my A1

@An1lo

Added a new print profile with a brim!

@user_1349522983

Print Profile

1 hour print (0.1mm layer height, 100% infill)

Three attempts, all unsuccessful

Show original

@An1lo

Oh, that's disappointing to hear. Have you tried cleaning your build plate with soap and water? You could also try downloading the STL and slicing it yourself with a brim!