TS101 case - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Spugno

Tools>Other Tools

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 4 walls, 40% infill

Designer

12.1 h

9 plates

4.9(92)

Open in Bambu Studio

Boost

228

454

148

118

959

561

Released

Description

I simply adapted the work of 'BlkWgn' to the TS101:

I imported the bottom insert from here and modified it to have a longer cable organizer.
I then created 2 different versions of the lid, one with just the Miniware logo, and the other with the logo and 'TS101' writing.

You will need:

M3x20 screws (6 pieces)
608 bearing (1 piece)

Tips:

print the stand in PETG
print the latches in TPU, they work better
I left the pins made by 'BlkWgn' in the project, however I think that the M3 screws are much better

In the print profile you can choose between 2 different top lids and 2 different top inserts.

UPDATE:

Fixed the original 'Pinecil Bottom Cable TS101' because the edge between the wall and the bottom was too thin.
Fixed print profile with "Thin Wall Detection" enabled.

See my other models for FPV and whoop.

Comment & Rating (148)

@lomokid

Boosted

Insert 3 plate has an issue with one of the walls and base adhesion. I printed it twice and both times had this, so I can conclude that it's not the printing failure

The designer has replied

@Spugno

Hi, thanks for your feedback. I have not had any adhesion problems and what do you mean by problems with the wall? Can you post some photos so I can understand better? thanks

(Edited)

@lomokid

Boosted

Replying to @Spugno :

Not sure if it's the error with the wall or something else. Here's what it looks like

@Spugno

Replying to @lomokid :

I don't know why but I can't view the photos. What format are they in?

@JoeMike

Boosted

Love the design! Only gripe I have is the the tolerance for the part that holds the iron holder (with bearing) in place while closed is a bit loose. So it falls out when I open the case.

The designer has replied

@Spugno

Thanks for your feedback. It probably depends on the printer tolerance, to solve this problem I can try to add 0.05-0.1 mm. If you are interested I will make the change.

@JoeMike

Boosted

Replying to @Spugno :

Honestly I just put a wrap of electrical tape around it and it sticks in there nicely now.

@user_2084481776

Replying to @JoeMike :

noticed the same thing and also wrapped some electrical tape around it

@user_3548447376

Unfortunately, the lid with only the logo contains 1 or 2 errors 1. First layer is an unprinted strip 2. There is a design flaw in the hinge, so the box cannot be closed

(Edited)

The designer has replied

Show original

@Spugno

Sorry about the issue you had with the lid printing. Thank you for reporting it, I have already fixed the lid and the print profile.

@MR73X

Perfect in every way... Thank you very much!!!

The designer has replied

@Spugno

Thanks, your feedback is very much appreciated

@YassineLabs

Boosted

Print Profile

0.2mm layer, 4 walls, 40% infill

Came out really great. thanks a lot.

The profile uploader has replied

@Spugno

Thank you so much for your feedback.

@WallyMike

Boosted

Print Profile

0.2mm layer, 4 walls, 40% infill

Printed great and fits my TS101 perfectly. Printed fully with BL PLA Matt White and Black. I’ll probably need to replace with pins with something a bit more durable at some point.

The profile uploader has replied

@Spugno

Thank you for your rating!

@ApoNono

Print Profile

0.2mm layer, 4 walls, 40% infill

Printed in PLA - best case/storage for the TS101 in my opinion. I also printed a gridfinity box to store it in.

@bartey

Boosted

Print Profile

0.2mm layer, 4 walls, 40% infill

thank you very much 😀

@tammy_wi

Boosted

Print Profile

0.2mm layer, 4 walls, 40% infill

thank you. nice Model. struggled with PETG. had to Heatcraps at same point. But here it ist

@tomantg

Print Profile

0.2mm layer, 4 walls, 40% infill

Really nice project, even PLA latches works fine :) in my case, stand fits perfect :) printed with PLA in olive green and black, i used regular stainless M3x20 screws from hardware store.

(Edited)