Pointer 9000 - magnetic front cover - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

BANG

Hobby & DIY>Electronics

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 4 walls, 15% infill

Designer

1.4 h

2 plates

4.8(8)

for Magnets with diameter 8mm, height 1mm

2.3 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Content has been automatically translated.

Show original

I designed a magnetic front cover for this mouse model. The printed files include: [Front Cover] and [Buttons] with magnet embedded holes.

I also thickened the assembly position of the button by 0.3mm to make it more secure to install. If you think it's not necessary, you can delete the cube named 'shim' in the software.

Warning：1.You need 4 pieces of 5 * 1.5mm magnets embedded in the holes, preferably fixed with glue. If you feel that the magnetic force is not enough, you can change the size of the magnet hole yourself.
2. Based on personal preference, I have set it to 0.16mm layer by default and removed support. Please adjust the setting according to your needs.

Comment & Rating (9)

@tinoator

Solid print. Works like a charm! Careful when you're adding glue to the magnets. I printed with the recommended settings and it was thin enough at the magnet spots that some glue leaked through the other side. Black PETG and Purple PLA.

@69jp

Print Profile

0.16mm layer, 4 walls, 15% infill

Prints perfectly. Only Problem I had is that I used white PLA for the outer shell of the mouse. Because the walls over the holes for the magnet are so small you can see them from the top (look at my picture). I personally think that this looks really cool, but keep this in mind if you are using white filament. I dont have any idea on how to fix this other than using filament in another color.