colored dice, customize your own color scheme, the pips are printed too

为节省材料和打印时间，最开始设计的方案是用笔涂的。打完才发现自己画画手残，边缘特别难画，画得特丑。

所以修改了模型，骰子主体做了更深的内凹，点数直接打印。 支持AMS多色打印系统，打印顺序设置为“逐件打印”，所以只要换3次料，不浪费材料，速度快。

注意：点数零件尺寸做的比较紧，如果不好装稍微磨一下。尽量用挤进去的，不然骰子摇起来点数容易掉。

-------------------------------------

Google translate

In order to save materials and printing time, the initial design was to paint with a pen. After the printing, I found that my drawing ability was very poor, and the edges were particularly difficult to draw, and the drawings were particularly ugly.

So the model was modified, the main body of the dice was made deeper, and the points were printed directly. It supports the AMS system, and the printing order is set to "print one by one", so you only need to change the material 3 times, without wasting materials, and the speed is fast.

Note: The size of the point parts is relatively tight, if it is difficult to install, grind it a little. Try to use squeezed ones, otherwise the points will fall off easily when the dice are shaken.